Does anyone know how to reset slot machine? Help :)

[Vegas79]

I have a Bally Slot machine that I plugged in to test and I was simulating coin drops, pulled reel and hit a small jackpot after a couple tries, hopper was empty so I ran inside to grab coins, when I came back it had turned itself off and will now not light up/turn on.. do I just need to reset or..? Please PM me if you have any advice or need additional information on machine to answer. Any help is greatly appreciated!
Thank you!

[Scott5114]

I have only worked on TITO Bally's, not coin, but I would certainly try turning the reset key. If that doesn't work try opening and closing the main door, and possibly keying it with the door open. Those are common tilt-clearing methods (Bally especially seems to like the open-and-close-main-door method).

[drfreeze1739]

What model is it..

The e series has the resets on the hopper.

The older ones have a safety switch behind the hopper...
There is a red light behind the hopper and there are a couple buttons on there to.
Press the reset switch back behind the Hopper and it should come back on.

They put that saftey switch back there on the older models so the hopper dont
keep running like that and burn up the machine or the hopper motor....

PM and i can send you a link to where to find som documentation. or i can see if i can zip the file i have and send it to your e-mail address.

[k15]

hi,all

I have a
Bally gimme 5 slot machine with a similar issue.
the MFC date is 7/96
model 563L3WTIO

does anyone have a technical manual on this machine?